• 대전광역시 유성구 대덕대로 582
  • 504호 (도룡동, 옥토빌딩)
  • 전화번호 042)825-6820 팩스 : 042)825-6839

항공우주

Pressure Sensor-APG Sensors



* Ranges from 0 to 15,000 psi
4-20 mA or 0-5 VDC output
1502 fitting (2202 fitting also avaliable)
Temperature compensated
Complies with NACE standards for sour gas pressure applications
Shunt Cal for testing full output

* 제품상세보기

Performance

Standard Pressure Ranges 0 to 15,000 PSIS
Overpressure: 1.5 X full scale or limit of WECO® fitting, whichever is less
Burst Pressure: 3 X full scale or limit of WECO® fitting, whichever is less
Accuracy (linearity, hysteresis, and repeatability): ±0.35% of full scale B.F.S.L
Temp Effects on Zero: ±0.026% FSO/°C (±0.01% FSO/°F)
Temp Effects on Span: ±0.026% FSO/°C (±0.01% FSO/°F)
Life: 10 million cycles minimum

Environmental

Compensated Temp: -40 to 65°C (-40 to 150°F)
Storage Temp: -50 to 120°C (-50 to 248°F)
Operating Temp: -40 to 85°C (-40 to 185°F)

Electrical

Supply Voltage: 10-30 VDC on sensor
Output Signal @ 21°C
4-20 mA: 3-30 mA max.
0 to 5 VDC: 110 mA inrush current
Loop Resistance: 1125 ohms @ 30 VDC decreasing linearly to 0 ohms at 10 VDC
Insulation Resistance: >100 megohms @ 500 VAC, 70°C
Shunt Cal: 100% of full scale output
ESD: 2 KV
EMC: IEC 1000-4-3

Surge: IEC 61000-4-5 Class 3

Materials of Construction

Wetted Materials: NACE approved
Enclosure: 316L stainless steel

Mechanical

Pressure Connection: WECO® standard 1502 or equivalent
Shock: 100 g for 11 msec
Thermal Cycling & Vibration: 15 g @ 10-2000 Hz, -40 to 85°C, 1000 cycles
Enclosure: NEMA 4X/IP44

Hazardous Location Approvals:

CSA/cCSAus Contract #237484
IS: Class 1, Division 1; Groups C & D
Ex ia IIB T4
Class 1, Zone 0, AEx ia IIB T4
Ambient: -40 to 85°C

첨부 파일 :



* Available ranges from vacuum to 500 psi or 0 to 10,000 psi Standardized output of 10 mV/V (other outputs available)
Special fittings, outputs and metric ranges available on request
Temperature compensated
Rugged all-stainless welded construction
High overpressure tolerance (2X full scale)
NIST certification available

* 제품상세보기

Performance

Standard Pressure Ranges
Compound Gauge: From vac up to 500 psi
Gauge or Absolute: From 0 to 10,000 psi
Flush Mount: 0 to 5,000 psi
Overpressure: 2x full scale
Burst Pressure: 10x full scale or 20,000 psi (whichever is less)
Accuracy (linearity & hysteresis)
Standard Diaphragm: ± 0.25% (B.F.S.L.)
Flush Mount Diaphragm: ±1.0% or better (B.F.S.L.)
Low Pressure Diaphragm: 15 psi min. to 30 psi max; ±1.0% or better (B.F.S.L.)
Stability - One Year Zero Drift:
15-5: < ±0.5% F.S., 316: < ±1% F.S.
Zero Balance Adjust: ±1% of full scale
Life: 10 million cycles minimum

Environmental

Standard Compensated Temp: 0 to 130°F (-17 to 54°C)
Extended Compensated Temp (Optional): -40 to 180°F (-40 to 82°C)
Storage Temp: -40 to 180°F (-40 to 82°C)
Operating Temp: -40 to 180°F (-40 to 82°C)

Electrical

Excitation: Calibrated at 10 VDC typically; contact factory for other input V options
Output: L9: 10 mV/V ±1%; L13: 3 mV/V ±1%; L14: 5 mV/V ± 1%
Input Impedance: 1200 ohms minimum
Output Impedance: Approx. 500 ohms
Output/Input: Non isolated, floating, 4 wire
Resolution: Infinite

Physical

Weight: 2 oz. (57 g)
Wetted Materials: 15-5 SS, 316L SS, or Hastelloy® C276
Media: Compatible with 15-5 SS, 316L SS, or Hastelloy® C276
Connector: Electrical receptacle: 4 pin bayonet PT1H-8-4 P or equivalent
Mating Connector: PT06A-8-4S (SR) or equivalent (not included)
Process Cavity Volume: 0.053 in.

첨부 파일 :

* PT-L1/L3/L10



* Available ranges from vacuum to 500 psi or 0 to 10,000 psi Available outputs: 4-20 mA, 0-5 VDC, 0-10 VDC, 1-5 VDC & 1-6 VDC
True 0-5 or 0-10 VDC options can transition from vacuum to positive pressure
Temperature compensated
Numerous process fittings available
High overpressure tolerance (2X full scale)
NIST certification available

* 제품상세보기

Performance

Standard Pressure Ranges

Compound Gauge: From vac up to 500 psi
Gauge or Absolute: From 0 to 10,000 psi
Flush Mount: 0 to 5,000 psi
Overpressure: 2x full scale
Burst Pressure: 10x full scale or 20,000 psi (whichever is less)
Accuracy (linearity & hysteresis)
Standard Fitting: ± 0.25% of full scale (B.F.S.L.)
Flush Mount Fitting: ±1.0% of full scale (B.F.S.L.)
Stability - One Year Zero Drift: 15-5: < ±0.5% F.S., 316: < ±1% F.S.
Zero Balance Adjust: ±1% of full scale
Life: 10 million cycles minimum

Environmental

Standard Compensated Temp: 0 to 130°F (-17 to 54°C)
Extended Compensated Temp (Optional): -40 to 180°F (-40 to 82°C)
Storage Temp: -40 to 180°F (-40 to 82°C)
Operating Temp: -40 to 180°F (-40 to 82°C)
Humidity: 0 to 90% relative

Physical

Weight: 3 oz. (85 g)
Wetted Materials: 15-5 SS, 316L SS, or Hastelloy® C276
Media: Compatible with 15-5 SS, 316L SS, or Hastelloy® C276
Process Cavity Volume: 0.0353 in.

첨부 파일 :

* IRU-9425



* 2 in. NPT Mounting 0.5 to 35 ft. (0.15 to 10.67 m) measuring range
Highly sensitive electrostatic transducer for difficult to detect targets
Programmable via USB using RST-3001 module
Programmable filtering options & response time
Two NPN transistor switches for process control or alarms

* 제품상세보기

* Operating Range: 0.5 to 35 ft. (0.15 to 10.67 m)
Output: 4-20 mA + (2) NPN trips
Operating Voltage: 12-28 VDC
Programming Voltage: 15-28 VDC
Total Current Draw: 75 mA @ 24 VDC
Maximum Power Rating: 2.5 W
Housing: Poly carbonate/PET blend
Mounting: 2 in. NPT or 3/4 in. NPT
Transducer Type: Electrostatic
Ratings: NEMA 12
Approvals: CSA General Purpose (pending)
Response Time: Programmable (20 ms minimum)
Sample Rate: Programmable (1-22 Hz)
Resolution: 0.1 in. (2.5 mm)
Accuracy: ± 0.25% of detected range (with no temperature gradient)
Adjustments: USB interface using RST- 3001, or RS-232 interface using RST-2001A
Operating Temperature: -40 to +140°F (-40 to 60°C)
Beam Pattern: 9° off axis (at full signal strength and sensitivity settings)
Electrical Connection: Pigtail or micro connector
Frequency: 50 kHz

첨부 파일 :

* PT-400



* Available ranges from 0 to 20,000 psi Available analog outputs: 4-20 mA, 0-5 V, or 0-10 V
Zero and Span adjustments
Hazardous area approvals
Numerous process fittings available
High overpressure tolerance (2X full scale)
NIST certification available

* 제품상세보기

Performance

Standard Pressure Ranges
Gauge: From 0 to 1,000 psi
Sealed: From 100 to 20,000 psi
Absolute: From 0 to 20,000 psi
Overpressure: 2x full scale
Burst Pressure: 3x full scale or limit of process connection (whichever is less)
Accuracy (linearity & hysteresis): ± 0.25% of full scale (B.F.S.L.)

Stability - One Year Zero Drift: < ±0.5% F.S.
Zero Balance Adjust: ±5% of full scale
Span Adjust: ±5%
Life: 10 million cycles minimum

Environmental

Standard Compensated Temp: 0 to 130°F (-17 to 54°C)
Extended Compensated Temp (Optional): -40 to 180°F (-40 to 82°C)
Storage Temp: -40 to 180°F (-40 to 82°C)
Operating Temp: -40 to 180°F (-40 to 82°C)
Humidity: 0 to 90% relative

Physical

Weight: 10 oz. (283 g) typical
Wetted Materials: 17-4 SS, 316L SS
Media: Compatible with 17-4 SS, 316L SS
Process Cavity Volume: 0.0353 in.

Hazardous Location Approvals: CSA/cCSAus Contract #237484
0-5 VDC, 0-10 VDC, 4-20 mA
IS: Class I, Division 2; Groups C & D; Ex nL IIB T4
Class I, Zone 2; AEx nL IIB T4
Ambient: -40 to 85°C
4/20 mA
IS: Class I, Division 1; Groups C & D; Ex ia IIB T4
Class I, Zone 0; AEx ia IIB T4
Ambient:-40 to 85°C

첨부 파일 :

* PT-500



* Depth or level measurement up to 450 ft.
Hazardous location approvals
Removable cage option for applications containing debris
Adjustable zero reference for 4-20 mA signal
Well depth, sea water, tank level, waste water, reservoir level

* 제품상세보기

Specification

Input: 10-28 VDC
Accuracy
Linearity, Hysteresis, Repeatability (B.F.S.L.): ± 0.50% of span
1 Year Stability: ± 0.25% of span
Temperature
Temperature Compensation Range: 32 to 122°F (0 to 50°C)
Storage: -40 to 175°F (-40 to 80°C)

Temperature Error: (Reference temperature 70°F (21°C))
Zero: ± 0.025% F.S./°F
Span: ± 0.025% F.S./°F
Electrical Connection: Vented watertight cable with free ends
Enclosure Protection: Submersible up to 450 ft.
Material

Wetted Parts: 316L SS
Cable: Polyurethane
Protective Cap: Polyamide

Electrical Protection: Protected against reverse polarity, surge per IEC 61000-4-5
Hazardous Location Approvals: CSA/cCSAus Contract #237484
IS: Class I, Division 1, Groups C & D; Ex ia IIB T4
Class I, Zone 0; AEx ia IIB T4
Ambient: -40 to 85°C

첨부 파일 :

* PG7



* Available ranges from vacuum up to 10,000 psi
Selectable units of measure
Battery or external power options
Up to ±0.1% full scale accuracy with NIST certification on selected ranges
Tare, Max/Min Reading, and Peak-Hold features
Analog output & two solid-state relays standard
Cleaned for oxygen service available

* 제품상세보기

Performance

Standard Pressure Ranges
Compound Gauge: From vac up to 500 psi, 30 psi minimum
Gauge: From 0 to 500 psi
Sealed Gauge: Greater than 500 psi, up to 10000 psi
Absolute: From 0 to 5000 psi
Overpressure: 2x full scale
Accuracy (linearity & hysteresis): ±0.25% of full scale (B.F.S.L.) or 2 digital counts, whichever is greater
Stability - One Year Zero Drift: < ±1% F.S.
Thermal Zero Shift: ±0.02% F.S./°F
Thermal Sensitivity Shift: ±0.02% F.S./°F
Life: 10 million cycles minimum

Environmental

Protection Rating: IP67
Compensated Temp: 20 to 130°F (-7 to 54°C)
Storage Temp: -40 to 160°F (-40 to 71°C)
Operating Temp: 0 to 160°F (-18 to 71°C)

Electrical
Batteries: (2) AA alkaline, user replaceable, typical battery life 2000 hours

External Power: 9-28 VDC

Display Type: 5 digit LCD, 0.4 in. digits
Display Resolution: 1 part in 10000
Low Battery Detection: Battery level indicator with 25% increments
Adjustments: Auto Zero, Tare
Auto-Off: Menu selectable 2, 4, 8, 16, 32 minutes
Relays (Optional): Two isolated solid-state relays (120 mA max; 240 V AC/DC max)

Physical

Weight: 0.36 lb.
Construction Materials
Case: Injection molded case material EMI-X® PDX-W-88341
Wetted Materials: 316L SS: Up to 10,000 psi
Process Cavity Volume: 0.073 in. typical

첨부 파일 :

* PG5



* Available ranges from vacuum up to 10,000 psi Tare, Max/Min Reading, and Peak-Hold functions Selectable units of measure
Variety of process connections available
Up to ±0.1% full scale accuracy with NIST certification on selected ranges
Analog output options: 4-20 mA (loop powered), 0-2 VDC, 0-5 VDC
Cleaned for oxygen service available

* 제품상세보기

Performance

Standard Pressure Ranges
Compound Gauge: From vac up to 500 psi, 30 psi minimum
Gauge: From 0 to 500 psi
Sealed Gauge: Greater than 500 psi, up to 10000 psi
Absolute: From 0 to 5000 psi
Overpressure: 2x full scale
Accuracy (linearity & hysteresis): ±0.25% of full scale (B.F.S.L.) or 2 digital counts, whichever is greater

Stability - One Year Zero Drift: < ±1% F.S.
Thermal Zero Shift: ±0.02% F.S./°F
Thermal Sensitivity Shift: ±0.02% F.S./°F
Life: 10 million cycles minimum
Environmental
Environmental

Compensated Temp: 20 to 130°F (-7 to 54°C)
Storage Temp: -40 to 160°F (-40 to 71°C)
Operating Temp: 0 to 160°F (-18 to 71°C)

Electrical

Batteries: Standard 9 V (1), user replaceable (2-year life typical with 16 min. auto off)
External Power: 9-28 VDC
Display Type: 5 digit LCD, 0.4 in. digits
Display Resolution: 1 part in 10000
Low Battery Detection: Battery level indicator with 25% increments
Adjustments: Auto Zero, Tare
Auto-Off: Menu selectable 2, 4, 8, 16, 32 minutes (not available with options L1, L3 or L4)

Physical

Weight: 0.36 lb.
Construction Materials
Case: Injection molded case material EMI-X® PDX-W-88341
Wetted Materials: 15-5 SS: >5000 psi; 316L SS: Up to 10,000 psi
Process Cavity Volume: 0.073 in. typical

첨부 파일 :